- Stitching accesses third-party cameras via ONVIF, GB28181 and RTSP — no camera replacement.
- Hikvision, Dahua, Uniview, Axis, Bosch, Sony and Hanwha all work.
- Retrofits tap streams in parallel, keeping the existing VMS and recording logic.
1. How Stitching Accesses Third-Party Cameras
Stitching does not need a specific camera brand. It pulls standard streams from the cameras, so the existing front end is reused and only a stitching server is added. The pipeline first undistorts each model, then fuses the streams into one panorama.
2. Three Stream Protocols
| Protocol | What It Is |
|---|---|
| ONVIF | Cross-vendor standard, most IP cameras support it |
| GB28181 | China national standard, required for many public projects |
| RTSP | Universal stream pulling, works across brands |
3. Mainstream Brand Compatibility
SuperMetaX has stitching experience across Hikvision, Dahua and Uniview, as well as Axis, Bosch, Sony and Hanwha. Mixed-brand sites work — bullet, PTZ dome, 180°/270°/360° cameras can share one panorama without replacing hardware.
4. Retrofit: How to Reuse Existing Cameras
- Tap streams in parallel — the existing VMS keeps its recording, preview and control logic.
- No rewiring — the stitching server sits beside the existing system.
- Mixed old/new — new cameras can be added alongside existing ones in the same panorama.
5. FAQ
Do I need to replace cameras to use stitching?
No. Any camera exposing ONVIF, GB28181 or RTSP can join the pipeline — no replacement required.
Can Hikvision, Dahua and Uniview mix in one panorama?
Yes. Different brands and models are normalised onto a common projection plane, then fused into one view.
Will the existing surveillance system be affected?
No. The retrofit taps streams in parallel; the existing VMS keeps its recording and control logic unchanged.