- Ship locks span a long chamber with cameras scattered across head, tail and channels.
- Stitching + 3D fusion turns them into one continuous view for full-lock awareness.
- Existing cameras are reused — only a fusion server is added.
1. The Ship Lock Monitoring Problem
A ship lock is a long chamber with cameras on both sides, at the head and tail, and along the upstream and downstream channels. Each feed is its own screen, so operators lose the spatial relationship between feeds — vessel position, gate status and channel conditions are hard to grasp at a glance.
2. The Solution: One Continuous Lock View
Panoramic video stitching reuses the chamber-side, head/tail and channel cameras and fuses them into a single continuous view. Combined with 3D fusion, the lock is seen as one spatial picture — vessel position, gate status and channel conditions on one screen.
3. Camera Reuse and Coverage
- Chamber sides — cameras along both walls merge into a long chamber panorama.
- Head / tail gates — gate and approach cameras merge into one overview.
- Upstream / downstream channels — channel cameras extend the same spatial view.
Retrofits tap streams in parallel without touching navigation or existing surveillance.
4. Performance Numbers
| Metric | Value |
|---|---|
| Max channels (single server) | 156 |
| End-to-end latency | Within 200 ms |
| Output resolution | Up to 8K |
| Camera reuse | RTSP / ONVIF / GB28181 |
5. FAQ
Can existing ship lock cameras be reused?
Yes. Chamber-side, head/tail and channel cameras exposing standard streams can join the pipeline — existing monitoring stays intact.
Can it combine with a 3D scene?
Yes. The stitched output can fuse with a 3D lock model, with video overlaid by spatial position for a virtual-real dispatch view.
Does latency meet real-time dispatch?
End-to-end latency is within 200 ms, meeting real-time lock monitoring and dispatch.